I need some help.

"Biggus Dickus (RevsBro)" (NKlein) 08/19/2016 at 00:15 • Filed to: None

0

6

Can someone tell me how to get the electrival pins/prongs out of this relay/harness connection? I feel like it’s stupidly obvious but gave up after an hour.

Junkrat aka Rick Sanchez: Fury Road Edition > Biggus Dickus (RevsBro) 08/19/2016 at 00:28

0

I don’t know what exact tool to use. It will look something like this one.

https://www.waytekwire.com/item/631/DEUTS…

It gets pressed down inside the terminal on the wire side and releases the clips that hold it in. The wire and terminal come out in one piece. The link is probably not the exact one you need, but the one you need will be very similar.

Scott > Biggus Dickus (RevsBro) 08/19/2016 at 00:29

0

hard to tell from the picture, but I'm pretty sure my explanation will work. In the second picture, just above the pin, there should be a little black tab buried back in the body of the connector. Go in with a very small flat bladed screw driver, like you would use for glasses. Lift that tab and you can pull the pin out. Just be careful not to break the tab.

415s30 W123TSXWaggoIIIIIIo ( •_•))°) > Biggus Dickus (RevsBro) 08/19/2016 at 00:37

5

RallyWrench > Biggus Dickus (RevsBro) 08/19/2016 at 00:55

1

You need a terminal removal set, or a very small flathead electronics screwdriver. There are small tabs on the front that need to be released before they can be pulled out the back.

AMGtech - now with more recalls! > Biggus Dickus (RevsBro) 08/19/2016 at 01:11

0

NINJA STAR!!!!!!

https://m.summitracing.com/parts/lil-5775…

Biggus Dickus (RevsBro) > 415s30 W123TSXWaggoIIIIIIo ( •_•))°) 08/19/2016 at 09:41

0

This accurately describes how I felt last night.